PDA

View Full Version : LED MHS Emitter holder dimensions.



Yoiaholic
05-04-2006, 10:22 PM
Before you flame me I have not found this anywhere.

Could someone measure the OD on the inner 'tube' of the MHS LED emitter? I mean the smaller port that holds the blade. It is less than the rest of the hilt. Ty.

james3
05-05-2006, 05:37 AM
That would be a question you could e-mail to Tim and he would get back to you on quicker. He is wicked busy right now and may not be getting on the board as much as he would like.

Just please don't ask what the thread count on the MHS is and I think you will be alright[;)]

<center>http://i43.photobucket.com/albums/e370/Dadof3/James3sig.jpg</center>

Yoiaholic
05-05-2006, 05:49 AM
I didn't want to bother tim, I figured that someone would have one and be able to grab the measurement quickly.

james3
05-05-2006, 06:25 AM
Are you looking for exact or close? I can measure with the handy tape measure but that is not going to get you dead on if your looking to get a piece machined to wrap around that puppy.
Inch and a quarter for the trusty Hechinger's Tape measure.

<center>http://i43.photobucket.com/albums/e370/Dadof3/James3sig.jpg</center>

meiv4
05-05-2006, 12:27 PM
simple answer = inch and a quarter

not so simple answer = 1.246"

hmmm hmmmm whooosh hmmmm whooosh crackel

Yoiaholic
05-05-2006, 02:32 PM
ty, I'm looking to get a sink drain at lowes, maybe one will fit. The parts are in the mail but I'm not patient :)

james3
05-05-2006, 02:43 PM
<font size="6"><font color="purple">22 GUAGE!</font id="purple"></font id="size6">

Just pay attention to the sizes on the boxes and match the part numbers.

<center>http://i43.photobucket.com/albums/e370/Dadof3/James3sig.jpg</center>

Yoiaholic
05-05-2006, 05:13 PM
I was looking for an obi-wan style emitter opening, I mgiht have found something but its definately just to tide me over until Tim get the emitters up. (Please Tim my lord?)

darkjedimaster07
05-07-2006, 07:37 PM
he any one know the inner id of the mhs hilt dosent have to be exact just close looking to build first saber and would like to use mhs kit with 8aaa battery holder thnx in advance


<font color="red">Zack</font id="red">

xwingband
05-07-2006, 07:39 PM
8AAA holders work fine.

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>