Amptrooper
08-03-2009, 05:32 AM
I am Done with my Mandalorian Saber!!!
It was a lot of work but it's done! Many thanks to all who have put up with my many questions. (I don't know your names on tcss forums)
Here is the run down:
Lux III Amber bin 6
Two 5mm white leds in chamber
1 magnifying lens from a led minlight.
1 amber lens cut from a light marker cut to fit in the crystal holder.
They both work to magnify the light.
1 amber crystal with the back of it defused (fake crystal but looks very nice)
1 brass thumb screw fastened to the heat sink
1 brass plumbing end cap.
quick connects on all leds.
One 5mm flashing red led in the pommel.
The chamber is vented to allow forward sound.
One of the leds for the crystal is wired to the red flashing led
so, the light slightly pulsates making it took as tho power is flowing through it.
The chamber was cut by a high speed rotary tool. (like a dremel). The edges are polished so that the edges are smooth yet still crisp.
~~~ Phew~~~ I wired it once. Then I undid it. No quick connects made it very hard to disconnect it to adjust or replace anything. I wired it again.
Had a short. I wired it again! Third times a charm!
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0044.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0044.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0066.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0066.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0069.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0069.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0079.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0079.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0075.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0075.jpg)
Here is the video!
http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCN1310.flv
It was a lot of work but it's done! Many thanks to all who have put up with my many questions. (I don't know your names on tcss forums)
Here is the run down:
Lux III Amber bin 6
Two 5mm white leds in chamber
1 magnifying lens from a led minlight.
1 amber lens cut from a light marker cut to fit in the crystal holder.
They both work to magnify the light.
1 amber crystal with the back of it defused (fake crystal but looks very nice)
1 brass thumb screw fastened to the heat sink
1 brass plumbing end cap.
quick connects on all leds.
One 5mm flashing red led in the pommel.
The chamber is vented to allow forward sound.
One of the leds for the crystal is wired to the red flashing led
so, the light slightly pulsates making it took as tho power is flowing through it.
The chamber was cut by a high speed rotary tool. (like a dremel). The edges are polished so that the edges are smooth yet still crisp.
~~~ Phew~~~ I wired it once. Then I undid it. No quick connects made it very hard to disconnect it to adjust or replace anything. I wired it again.
Had a short. I wired it again! Third times a charm!
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0044.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0044.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0066.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0066.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0069.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0069.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0079.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0079.jpg)
http://i968.photobucket.com/albums/ae162/Amptrooper/th_DSCF0075.jpg (http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCF0075.jpg)
Here is the video!
http://s968.photobucket.com/albums/ae162/Amptrooper/?action=view¤t=DSCN1310.flv