View Full Version : Crystal Chamber Tutorial
Invisas1979
07-18-2009, 05:26 AM
Been looking in the forum for threads on Crystal chambers and decided to see if anyone had a tutorial for how to make one and mount it.
Someone asked the same question in another thread so I thought I'd take the potential heat and ask away.
Sooooooo has anyone got any good photos of the build of one (in steps) that can be turned into a tutorial, especially including how to keep it seated in hilt.
Darth_DevilGuy
07-18-2009, 06:05 PM
I haven't seen any posted, right now it's sort of hap hazard, because most chambers are unique to the build.
Obi-Dar Ke-Gnomie
07-18-2009, 07:49 PM
I've only made one crystal chamber so far, but here it is.
http://i238.photobucket.com/albums/ff102/dar4jc/Starkiller%20saber/1502.png
You can see the whole saber here:
http://forums.thecustomsabershop.com/showthread.php?t=678&page=2
There are a few very well done crystal chambers on that page.
There's really no set method to follow. Like DDG said, every one is different. All I can suggest is that you look around through the gallery pages and see how others have done theirs and modify what they did to suit your build.
DJMoonbass
07-18-2009, 07:58 PM
hey! thats really cool. how did you attach that assembly? i cant see it very well.
Obi-Dar Ke-Gnomie
07-18-2009, 09:55 PM
The forward washer is cut out like a "C", with the opening being just big enough to slide over the smaller diameter in the heat sink. There are four holes drilled in that washer, to match the rear washer. I had to dremmel four channels in the heat sink for the rods to fit into. It was kind of fiddly to assemble, but once I tightened the nuts, it was rock solid.
I used 5mm LED bezels to hold the crystal.
http://www.thecustomsabershop.com/Red-LED-indicator--P114.aspx
pipster79
07-18-2009, 10:11 PM
your dremil-fu is strong...you must teach me lol
Lord Dottore Matto
07-18-2009, 11:46 PM
your dremil-fu is strong...you must teach me lol
You have NO idea how strong it really is, he is one of the VERY best.;)
cardcollector
07-19-2009, 05:18 AM
might as well jump in while its alive...
Has anyone made any sort of crystal chamber for a 1 1/4'' sinktube?
EDIT!!!!!!!!!!
Obi-Dar: That is a 1 1/4" sinktube bladeholder right??
Would you please spoonfeed me the parts you used!?!?
JamoUp
07-19-2009, 06:33 AM
here is a link to a saber I made using the crystal/sound chamber sold here at the store.
http://forums.thecustomsabershop.com/showthread.php?t=8251
Madcow
07-19-2009, 08:25 AM
I'm working on a crystal chamber built off of an MHS neck peice.
BTW - Obi - your starkiller and cahmber ROCKS!
I will take lots of pics and maybe make a tutorial.
So far...
http://i204.photobucket.com/albums/bb98/rpetkau/MHS%20Stuff/th_IMG_3185.jpg (http://s204.photobucket.com/albums/bb98/rpetkau/MHS%20Stuff/?action=view¤t=IMG_3185.jpg)
http://i204.photobucket.com/albums/bb98/rpetkau/MHS%20Stuff/th_IMG_3189.jpg (http://s204.photobucket.com/albums/bb98/rpetkau/MHS%20Stuff/?action=view¤t=IMG_3189.jpg)
http://i204.photobucket.com/albums/bb98/rpetkau/MHS%20Stuff/th_IMG_3191.jpg (http://s204.photobucket.com/albums/bb98/rpetkau/MHS%20Stuff/?action=view¤t=IMG_3191.jpg)
MC
Obi-Dar Ke-Gnomie
07-19-2009, 12:20 PM
Obi-Dar: That is a 1 1/4" sinktube bladeholder right??
Yep.
Would you please spoonfeed me the parts you used!?!?
*Sigh* My son is three now. I thought I was done with this.
"OK, heeeere comes the airplane. Open wide!";)
-1/25" OD washers with a small hole
-6-32 threaded rod
-6-32 nuts
-LED bezels linked above
-brass tubing from a hobby store. They sell this in different sizes for use in RC cars and stuff. You'll have to bring the threaded rod with you to find the size that fits.
-quartz crystal point. I found some in a second hand/junk store, in with other semi-precious stones. I think you can probably find them on Ebay too. Failing that, TCSS sells the acrylic ones for $1.99 a bunch.
That's about it. Some careful measurement, and some dremmel fu.
Master Schyler
07-19-2009, 09:50 PM
LOL
Looks cool I may have to incorperate this into one of my designs down the road.
cardcollector
07-20-2009, 07:23 AM
hehehehe!:D:D:D
Thanks a lot obi-dar. My next saber will have that chrystal chamber (albeit with some modification) in it.:cool:
Jedi-Loreen
07-20-2009, 10:35 AM
Um, 1/25" washer? That's pretty darn small. I think you mean 1.25"? ;)
Darth_DevilGuy
07-20-2009, 11:45 AM
thanks obi dar, I may have to incorporate that into one of mine, though it'll be awhile till I'm ready to make one...
Obi-Dar Ke-Gnomie
07-20-2009, 10:33 PM
Um, 1/25" washer? That's pretty darn small. I think you mean 1.25"? ;)
Ya got me. You've been waiting to pounce on me since I got you with that LMGTFY link, haven't you?;)
Jedi-Loreen
07-20-2009, 11:19 PM
No, I'd actually forgotten all about that.
Thanks for reminding me. :-|
:p
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.