Orings, Where do you get them?

[Goltar Bias]

Ok, on the risk of sounding dumb where do you get the thick black Orings in 1.5" inner diameter, and 1.25 inch inner diameter? I have looked on the net and got some really thin ones and have looked in every store I can think of and got nothing if any one can help it would be appreciated.

[ARKM]

Your local hardware store. No really.

Ace and True Value will have a larger selection than Home Depot or Lowes and in different areas of the store no less.

[Rhyen Skytracker]

You can get them on ebay in bulk. You want size 123 or 217. I used to get them from a different ebay store, but I don't see them online anymore. Here is one that I found.

http://cgi.ebay.com/Buna-Orings-217-90D-50-pc-oring_W0QQitemZ200332720987QQcmdZViewItemQQptZPneu matic_Hydraulic_Valves_Parts?hash=item2ea4c2bb5b&_trksid=p4634.c0.m14.l1262&_trkparms=|301%3A1|293%3A1|294%3A30 (http://cgi.ebay.com/Buna-Orings-217-90D-50-pc-oring_W0QQitemZ200332720987QQcmdZViewItemQQptZPneu matic_Hydraulic_Valves_Parts?hash=item2ea4c2bb5b&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A1%7C293%3A1%7C294%3A30)

[Revan]

http://www.thecustomsabershop.com/Grips-Clips-D-rings-C6.aspx

all there. unless these aren't the size your looking for... i kinda just lazily posted this :roll:

[Ingchao]

Check the Sears Hardware store. They just upgraded the store by me and it's got a FULL aisle of nuts bolts and all sorts of o-rings. They've even got bolt caps with skulls on 'em. It's hardware nirvana I tell ya!

[Goltar Bias]

Thank you all for the responses and the info i see now i just needed to look harder. Feel like i was a bit slack in my efforts. Thank you once again.