Do-Clo
05-30-2009, 01:21 AM
Here is a refit of a Parks el saber. I used a RGB emitter led and mixed the
red and blue to make a nice purple. It has a 7.4 volt lithium battery pack
and I used the parks led strip to control the on/off of the led. The blade is
a 36 inch long 3/4 diameter thin wall do-clo blade. I had planned to install
a MR FX sound board but there was just not enough room.
http://i48.photobucket.com/albums/f217/Do-Clo/100_0264.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0265.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0266.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0267.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0268.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0276.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0273.jpg
red and blue to make a nice purple. It has a 7.4 volt lithium battery pack
and I used the parks led strip to control the on/off of the led. The blade is
a 36 inch long 3/4 diameter thin wall do-clo blade. I had planned to install
a MR FX sound board but there was just not enough room.
http://i48.photobucket.com/albums/f217/Do-Clo/100_0264.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0265.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0266.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0267.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0268.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0276.jpg
http://i48.photobucket.com/albums/f217/Do-Clo/100_0273.jpg