FX Kit saber

[Do-Clo]

After taking so many of the FX kit sabers apart I decided it was time to do a rebuild of the
one I had put back for myself. I machined a aluminum blade holder for the saber and
machined a led mount/heat sink. I replaced the stock optics with a reflector which improved
the perfomance of the RGB led. I drilled and tapped a allen set screw for the blade under the
emitter shroud so the blade could be removed. I replaced the stock blade with a 1 inch diameter
thin wall blade with blade film to even out the blade.

http://i48.photobucket.com/albums/f217/Do-Clo/100_0154.jpg

http://i48.photobucket.com/albums/f217/Do-Clo/100_0156.jpg

http://i48.photobucket.com/albums/f217/Do-Clo/100_0166.jpg

http://i48.photobucket.com/albums/f217/Do-Clo/100_0167.jpg

http://i48.photobucket.com/albums/f217/Do-Clo/100_0169-1.jpg

[Lord Dottore Matto]

THEY ARE KINDA FUN HUH? (sorry for allcaps!):mrgreen:

[DaJoQuim]

Great Job Do-Clo!!