Just made me first TCSS Purchace

[kyncaid]

Hi all i've been in the forum for a little while and have now made my first purchase.

i'll be making 2 sinktube sabers.

I live in Brisbane Australia and the 12" 1.25" sinktubes that are sold at TCSS for for about $6USD are as rare as hens teeth here and when you do find them they are expensive $55AUD. So it was cheeper to get them from the states and shipped over than buying them from a Plumbing supplie store here.

apart from the blade tip i'll be getting the rest of blade from here in OZ

I look forward to making my own saber, the forums have been an invaluable resource.

i hope my first saber will look something like this

http://farm4.static.flickr.com/3377/3178088246_31e0dd5063.jpg

2 x Build Your OwnLuxeon III / Seoul P4 Electronics Kit 1 green 1 blue
2 1.25LED 1.25" Sink tube LED/Blade holder
2 1.25tube 1-1/4" x 12" Chrome sink tube
1 8-32thumbblack 8-32 x 13/32" Black Thumb Screw
1 8-32Lrg 8-32 x 13/32" Large Thumb Screw
4 JSTCon JST connectors
2 Dmount D-ring belt mount
2 3/4D 3/4" D-Ring
2 SwBez Switch Bezel Nut
2 stip1Thick-R Shouldered 1" thick walled blade tip with reflective disc

[Kal El Rah]

Very nice concept and the parts you ar getting makes it that much closer to reality. Good luck and I look forward to seing it come to fruition.

[Thaxos]

That is a slick render, and best of luck with your build!

[Sairon]

That is a nice render, can't wait to see it finished.

[ArkaiHalon]

very nice render indeed. Welcome to being active on the forums. I really like the saber you have designed there.

[thejedilestat]

Hi all i've been in the forum for a little while and have now made my first purchase.

i'll be making 2 sinktube sabers.

I live in Brisbane Australia and the 12" 1.25" sinktubes that are sold at TCSS for for about $6USD are as rare as hens teeth here and when you do find them they are expensive $55AUD. So it was cheeper to get them from the states and shipped over than buying them from a Plumbing supplie store here.

apart from the blade tip i'll be getting the rest of blade from here in OZ

I look forward to making my own saber, the forums have been an invaluable resource.

i hope my first saber will look something like this

http://farm4.static.flickr.com/3377/3178088246_31e0dd5063.jpg

2 x Build Your OwnLuxeon III / Seoul P4 Electronics Kit 1 green 1 blue
2 1.25LED 1.25" Sink tube LED/Blade holder
2 1.25tube 1-1/4" x 12" Chrome sink tube
1 8-32thumbblack 8-32 x 13/32" Black Thumb Screw
1 8-32Lrg 8-32 x 13/32" Large Thumb Screw
4 JSTCon JST connectors
2 Dmount D-ring belt mount
2 3/4D 3/4" D-Ring
2 SwBez Switch Bezel Nut
2 stip1Thick-R Shouldered 1" thick walled blade tip with reflective disc

i know what u mean about the sinktube that stuff is hard to find i live in tasmainia now i was in QLD for 3 years i myself just got my first order from TCSS yesterday

the only thing i can say is this saber looks really cool and good luck and when u solder the LED take your time like really do it slow my solder looks so ulgy on my Lux3 Green but it was my first so ya


MTFBWY

[Rhyen Skytracker]

I agree with everyone else, that is a great render. What program did you use to make it? I also look forward to seeing it finished.

[DJMoonbass]

will it connect in the middle? i think it would make a kick @#$ double. with a green AND blue blade.... did you go with green and blue Seouls or Luxeon 111? im anxious to see the twins!!!