1.25 sink tube

[darth toilet]

this is my first lightsaber and I want to go cheap for the first and the blade ,led and etc. are a little expensive and if it doesn't work is there a cheaper way to make a blade led assembly

[xl97]

cheapest electronics kit yoru probably gonna find:

http://www.thecustomsabershop.com/Build-Your-Ownbr-Luxeon-III-Seoul-P4-Electronics-Kit-P6.aspx


1.25 sinktube blade holder:
http://www.thecustomsabershop.com/125-Sink-tube-LEDBlade-holder--P269.aspx


the 1.25 sintube itself:
http://www.thecustomsabershop.com/1-14-x-12-Chrome-sink-tube--P83.aspx

(or buy one at yoru local hardware store..)

tutorials on how to build:

http://forums.thecustomsabershop.com/showthread.php?t=2547


as you were instructed before in one of your other posts.. read the links in :Lord Dottore Matto footer ....or... Loard Maul's footer..

[vargose]

The blade holder is well worth the cost.

You could cut cost by building your own blade. See this tutorial. You can get all the materials here.
http://forums.thecustomsabershop.com/showthread.php?t=7274

[Lord Dottore Matto]

My boy, the basic electronics and bladeholder do not get any cheaper. This is an EXPENSIVE hobby, which is something to think about before you get into it. Also, we will not refer you to other parts sources if something is offered at TCSS. TCSS owns these forums and it is horrible form to try and undercut them! You also need to read the forum rules and regulations right away and I do mean BEFORE you post any more.