View Full Version : What is the thread size of the MPS Insert #6?
Braxus
02-17-2009, 06:18 PM
I was curious if anyone knows what the thread size is for the recharge port hole in the MPS Insert #6. I was thinking maybe using different screwed in pieces for it instead of the recharge port.
Arm on Fire
02-18-2009, 06:16 AM
5/16-32
Braxus
02-18-2009, 06:58 AM
thanks arm!! :)
i knew it had to be a big size like that
Donnovan Sunrider
02-18-2009, 07:10 AM
Good luck finding a tap/die that matches. I've been looking for a while now and had no luck.
Arm on Fire
02-18-2009, 11:56 AM
tap - http://www.mcmaster.com/#2521a428/=nptij
die - http://www.mcmaster.com/#26005a212/=nptpf
I havent found any bolts that size yet though, but with the die you could make one :)
Sorry Donnovan I didn mean to step on your toes so hard :)
Donnovan Sunrider
02-21-2009, 12:11 PM
Thanks Arm!
I've been looking in the local hardware stores mainly, so that's why I didn't find it. Apparently it's not a very commonly used thread size.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.