Trenien
11-30-2008, 08:21 AM
I have this Vader Hasbro saber electronics, which I intend to use for the saber I have under way and I've been wondering a couple of things:
- The original toy's supposed to work with two AA batteries, is there some kind of risk I fry the board if I use a 3.7v battery (li-ion)?
- For a newbie like me, it looks like the current goes directly from the batteries to the leds (they are soldered to their own board), so does it mean that these two wires' tension is whatever the battery deliver?
In case it's useful to know which board I'm talking about, the box says it's a 2005 Hasbro copyright, the blade must be drawn by hand and it has both clash and move sound effects.
Thanks
- The original toy's supposed to work with two AA batteries, is there some kind of risk I fry the board if I use a 3.7v battery (li-ion)?
- For a newbie like me, it looks like the current goes directly from the batteries to the leds (they are soldered to their own board), so does it mean that these two wires' tension is whatever the battery deliver?
In case it's useful to know which board I'm talking about, the box says it's a 2005 Hasbro copyright, the blade must be drawn by hand and it has both clash and move sound effects.
Thanks