Lord Dottore Matto
11-15-2008, 01:27 PM
Here is a Mace Windu MR hilt that was originally purchased on eBay as a non-working POS. Well, at least this one now has some redeeming value!
First, I sanded off all of the "Gold" and painted the pieces flat black. Next, I created a crystal chamber with a sliding internal shroud (thanks Eastern57!). I took many photographias for y'all. The LED's are driven in parallel by the MR board and the crystal chamber is seated into the MR cradle. Blade LED is a Bin1 Cyan Lux III. Crystal chamber LED is from a MR strip and is epoxied inside of a green acrylic TCSS crystal. MR blade holder is a TCSS kit.
Here is First build video:
http://s291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/?action=view¤t=100_3687.flv
Here is the initial layout showing the Blade holder, uncut crystal chamber, crystal and sound module:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3681.jpg
A close up of how the LED's will be connected (Longer wires will be used because these LED's will be 5" apart in the final build:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3682.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3685.jpg
This is the finished crystal chamber with the wires soldered on:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3695.jpg
This is the crystal chamber with the wires that will attach to the battery pack and speakers:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3697.jpg
This is the crystal chamber inserted into the groove in the MR module and the wires all soldered and heatshrinked (except for the main LED):
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3698.jpg
Now everything is soldered together:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3699.jpg
and fitted together (wires are tucked into the plastic module):
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3700.jpg
Fire it up!:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3701.jpg
This is the late build Video:
http://s291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/?action=view¤t=100_3703.flv
Now, on to the finished product!
Here is the video:
http://s291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/?action=view¤t=100_3704.flv
And the glamour shots:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3706.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3708.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3709.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3710.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3711.jpg
Well, there she is! At least she is a little less of a POS now... :lol:
First, I sanded off all of the "Gold" and painted the pieces flat black. Next, I created a crystal chamber with a sliding internal shroud (thanks Eastern57!). I took many photographias for y'all. The LED's are driven in parallel by the MR board and the crystal chamber is seated into the MR cradle. Blade LED is a Bin1 Cyan Lux III. Crystal chamber LED is from a MR strip and is epoxied inside of a green acrylic TCSS crystal. MR blade holder is a TCSS kit.
Here is First build video:
http://s291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/?action=view¤t=100_3687.flv
Here is the initial layout showing the Blade holder, uncut crystal chamber, crystal and sound module:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3681.jpg
A close up of how the LED's will be connected (Longer wires will be used because these LED's will be 5" apart in the final build:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3682.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3685.jpg
This is the finished crystal chamber with the wires soldered on:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3695.jpg
This is the crystal chamber with the wires that will attach to the battery pack and speakers:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3697.jpg
This is the crystal chamber inserted into the groove in the MR module and the wires all soldered and heatshrinked (except for the main LED):
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3698.jpg
Now everything is soldered together:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3699.jpg
and fitted together (wires are tucked into the plastic module):
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3700.jpg
Fire it up!:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3701.jpg
This is the late build Video:
http://s291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/?action=view¤t=100_3703.flv
Now, on to the finished product!
Here is the video:
http://s291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/?action=view¤t=100_3704.flv
And the glamour shots:
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3706.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3708.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3709.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3710.jpg
http://i291.photobucket.com/albums/ll317/drdicarlo/BCC%20Mace%20MR%20conversion/100_3711.jpg
Well, there she is! At least she is a little less of a POS now... :lol: