corbin effect

[chocolate pain]

my tcss double wrap doesn't have a corbine effect on my blade... what am i doing wrong... its just slanted lines like this

/\
|/|
| |
|/|
| |
|/|

[Lord Maul]

Is that diagram showing the "grain" of the corbin film going diagonal relative to the blade wall? If so, it's wrong. The grain of the film should be perpendicular to the walls of the blade. That will give you the core effect.

If you want the ramp on/off effect too, you have to use either Corbin's board, Ultrasound, Erv's dimmer, or CF.

[chocolate pain]

i can't get it paralell it starts turning every single time i put it in the tube

[Lord Maul]

Roll it on a thin dowel. That way when you insert it it will stay rolled.

[Onli-Won Kanomi]

Lord Maul is correct you don't want it parallel you want it PERPENDICULAR as he said...lots of tiny little lines going around in circles on the inside of the blade 'stacked' all the way up the length...thats the way to get the coring effect.

/\
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]
[-]