endor rebel star3 u for red,blue or green now avalible

[LeMoel]

led supply offers 3 red,blue or green stars now,did everyone know this yet?
http://www.ledsupply.com/endorstar.php

[Hasid Lafre]

YEs, luxeonstar has had them for quite a while now bu tth edistributers are finally getting to them.

Oh and yu can get them at the makers site phillips.

[Strydur]

Hasid..what are you talking about?

Luxeonstar does not sell the 3 up red,3 up green, or 3 up blues...they do sell a rgb which has red,green,and blue all on one star but thats not what the OP is referring to.

Phillips does not sell or make the 3 up Endor's.


These are pretty nice and you could drive them using a single Buck Puck but you need to supply over 10v in order to do so.

[Malaki Skywalker]

These are pretty nice and you could drive them using a single Buck Puck but you need to supply over 10v in order to do so.

If you could stock them and a 3AA 11.1V Li-Ion packs... it can be done, H3ll I'd buy one of those set ups! :p

[xwingband]

Or 7.2V from a 6AA NiMH like that in the store would work if you paralleled the LEDs. Then it'd be like 3.7V and 3A, but you'd have a shot at an hour of runtime instead of struggling for 45 min.

[Malaki Skywalker]

Or 7.2V from a 6AA NiMH like that in the store would work if you paralleled the LEDs. Then it'd be like 3.7V and 3A, but you'd have a shot at an hour of runtime instead of struggling for 45 min.

Then again, whats going to be the easiest at this point in time :?

[LeMoel]

i think the 25 degree optics may work for these ones, because no color mixing is needed

and what i'am thinking of doing is instead of using 10v or watever,maybe just use 2 of the leds