PDA

View Full Version : Burn out



jamesjeffh
09-18-2008, 03:59 PM
After my red lux III burned out on me I had to put this saber I was making on the shelf for a while. I was thinking of having a leftover prolight from the joe jedi kit right underneath the cutouts and cutting a small piece of poly c with my left over corbin film so it would have a nice core going and then sorround it with 3 small tubes something like the starkiller saber but now thats it's just been sitting here I'm wondering if I should do anything else with the saber like cut off the brass powder coat and leave bare metal and have aluminum tubes on the inside or add a few grooves or something or maybe even switch out colors all together. Any suggestions ?

Hasid Lafre
09-18-2008, 04:41 PM
A slide over cover with a screw for a lock so it dont open on you. then go hog wiles with eletronics and put a crystal in the cutouts and such.

I would take 2 prolights one to light up the crystal and one for the blade and tie them togeather so when you change the color it changes the crystal color also.