Strydur
09-04-2008, 08:36 AM
The UltraSound 2.0 pre-sale will start at midnight tonight PST. Here is the current info.
The Pre-Sale introductory price for the new board is $99.00
The Projected Retail Cost after the pre-sale will be $119.00
The estimated ship date for these is the week of October 20th
Any parts ordered along with these will not ship until they do.
Ultrasound Version 2.0
Sound Transferring Electronic Velocity Effects System
The New Ultrasound 2.0 based on the same compact 1 x 2 x .05 inch platform
the new 2.0 with faster more powerful components and new operating system
offers more features, improved performance and improved sounds.
The New Ultrasound 2.0 features:
Supports Multiple Luxeon LED types including:
Single button/switch operation and set-up.
Luxeon, 3watt, 5watt, K2, Luxeon 3 Red, and a New Luxeon 3 overdrive selection.
A New Clash Lock Effect that rapidly pulses the LED for that classic blade lock up
or cutting through objects look.
5 different Blade frequencies ranging from a solid blade through slow to fast pulse/flickering.
Improved and user adjustable sensitivity for Clash detection and Motion Detection.
New and improved Clash and Motion sounds.
New and improved sound mixing and playback.
Improved motion and sound registration providing different sounds for the
corresponding slow, moderate, and faster movements.
Two Selectable Volume levels to better accommodate different speaker outputs for
clear and better sound projection.
__________________________________________________ __________________________________________________ ___ ULTRASOUND 2.0 Operation instructions.
Saber Functions.
This board is meant for use with a momentary switch.
1. Press button once to turn on.
2. Hold down the Button for approximately 2.5 seconds to turn it off.
3. Activating the Clash Lock effect:
While saber is on to activate Clash lock effect simply press the button and release.
Clash lock will activate with rapid pulse effect.
Press button again to deactivate.
Menu Selections.
1.To Enter the Set-up (while saber is off) press and hold the button until the voice menus begins.
2. Available LED and currents are as follows in the menu.
Press button to go through the choices.
After you hear the board say the LED type your using, hold the button down to select it.
(be sure to select the correct LED type installed in your saber)
Luxeon 3
Luxeon 3 red
Luxeon 5
Luxeon K
Luxeon 3 overdrive
3. Adjustable Settings:
Press button to toggle through selections, hold down to select desired mode.
Blade frequency (pulse/flicker rate) levels 1-5 (1-solid blade 2-slowest 5-fastest)
Volume Levels 1-2 (1 Lowest 2 Loudest)
Impact sensitivity levels 1-5 (1 least sensitive 5 most sensitive)
Motion sensitivity levels 1-5 (1 least sensitive 5 most sensitive)
4. The saber will exit the setup menu after the selections and will tell you "settings recorded successfully"
Battery input voltage.
Maximum for board = 12V
Minimum for Luxeon 3 and K2 = 4.5V (3.6 for some)
Minimum for Luxeon 5 = 7.2V
DO NOT leave batteries in Saber while not in use for long periods that would allow
the batteries to completely drain.
REVERSE VOLTAGE or improper LOW VOLTAGE can damage the electronics.
Only Use the specified batteries and observe all battery precautions.
FOLLOW CHARGING INSTRUCTIONS CAREFULLY FOR LITHIUM ION BATTERIES
ACCORDING TO CHARGER INSTRUCTIONS.
** Photosensitive epilepsy warning.
Photosensitive epilepsy is the name given to epilepsy in which all, or almost all, seizures
are provoked by flashing or flickering light, or some shapes or patterns. Both natural and
artificial light may trigger seizures. Various types of seizure may be triggered by flickering light.
The Pre-Sale introductory price for the new board is $99.00
The Projected Retail Cost after the pre-sale will be $119.00
The estimated ship date for these is the week of October 20th
Any parts ordered along with these will not ship until they do.
Ultrasound Version 2.0
Sound Transferring Electronic Velocity Effects System
The New Ultrasound 2.0 based on the same compact 1 x 2 x .05 inch platform
the new 2.0 with faster more powerful components and new operating system
offers more features, improved performance and improved sounds.
The New Ultrasound 2.0 features:
Supports Multiple Luxeon LED types including:
Single button/switch operation and set-up.
Luxeon, 3watt, 5watt, K2, Luxeon 3 Red, and a New Luxeon 3 overdrive selection.
A New Clash Lock Effect that rapidly pulses the LED for that classic blade lock up
or cutting through objects look.
5 different Blade frequencies ranging from a solid blade through slow to fast pulse/flickering.
Improved and user adjustable sensitivity for Clash detection and Motion Detection.
New and improved Clash and Motion sounds.
New and improved sound mixing and playback.
Improved motion and sound registration providing different sounds for the
corresponding slow, moderate, and faster movements.
Two Selectable Volume levels to better accommodate different speaker outputs for
clear and better sound projection.
__________________________________________________ __________________________________________________ ___ ULTRASOUND 2.0 Operation instructions.
Saber Functions.
This board is meant for use with a momentary switch.
1. Press button once to turn on.
2. Hold down the Button for approximately 2.5 seconds to turn it off.
3. Activating the Clash Lock effect:
While saber is on to activate Clash lock effect simply press the button and release.
Clash lock will activate with rapid pulse effect.
Press button again to deactivate.
Menu Selections.
1.To Enter the Set-up (while saber is off) press and hold the button until the voice menus begins.
2. Available LED and currents are as follows in the menu.
Press button to go through the choices.
After you hear the board say the LED type your using, hold the button down to select it.
(be sure to select the correct LED type installed in your saber)
Luxeon 3
Luxeon 3 red
Luxeon 5
Luxeon K
Luxeon 3 overdrive
3. Adjustable Settings:
Press button to toggle through selections, hold down to select desired mode.
Blade frequency (pulse/flicker rate) levels 1-5 (1-solid blade 2-slowest 5-fastest)
Volume Levels 1-2 (1 Lowest 2 Loudest)
Impact sensitivity levels 1-5 (1 least sensitive 5 most sensitive)
Motion sensitivity levels 1-5 (1 least sensitive 5 most sensitive)
4. The saber will exit the setup menu after the selections and will tell you "settings recorded successfully"
Battery input voltage.
Maximum for board = 12V
Minimum for Luxeon 3 and K2 = 4.5V (3.6 for some)
Minimum for Luxeon 5 = 7.2V
DO NOT leave batteries in Saber while not in use for long periods that would allow
the batteries to completely drain.
REVERSE VOLTAGE or improper LOW VOLTAGE can damage the electronics.
Only Use the specified batteries and observe all battery precautions.
FOLLOW CHARGING INSTRUCTIONS CAREFULLY FOR LITHIUM ION BATTERIES
ACCORDING TO CHARGER INSTRUCTIONS.
** Photosensitive epilepsy warning.
Photosensitive epilepsy is the name given to epilepsy in which all, or almost all, seizures
are provoked by flashing or flickering light, or some shapes or patterns. Both natural and
artificial light may trigger seizures. Various types of seizure may be triggered by flickering light.