PDA

View Full Version : Harbinger Stunt



Lord Dottore Matto
08-28-2008, 10:07 PM
Whew, Its been a whole 3 days since I posted a new saber. I take absolutely no credit for this one. I bought it (sans electronics) from Airsoftmode. I am posting it to show his nice work and to give a little example of what can be done with his stuff! All of the mechanicals are from the shop here and include a luxIII red, aluminum heatsink, 9v battery attachment and resistor. Why a resistored hilt you may scoff? well there is only about 3 inches of internal space here. The battery actually sits directly under the switch. Tried to fit a puck but no dice. However, it is a very bright, well weighted, cool lookin stunt saber!:cool:

as always, a few pix and a link to the album!

http://i291.photobucket.com/albums/ll317/drdicarlo/Harbinger_stunt_9v/100_3277.jpg

http://i291.photobucket.com/albums/ll317/drdicarlo/Harbinger_stunt_9v/100_3282.jpg

http://i291.photobucket.com/albums/ll317/drdicarlo/Harbinger_stunt_9v/100_3280.jpg

http://i291.photobucket.com/albums/ll317/drdicarlo/Harbinger_stunt_9v/100_3274.jpg

ALBUM---> http://s291.photobucket.com/albums/ll317/drdicarlo/Harbinger_stunt_9v/

Kal El Rah
08-28-2008, 10:25 PM
Nice saber, 1 question, can you have the pommel drilled out to get more room to install a sound board and a battery pack?:twisted:

Lord Dottore Matto
08-28-2008, 10:30 PM
Nice saber, 1 question, can you have the pommel drilled out to get more room to install a sound board and a battery pack?:twisted:

Possibly, If one had the proper milling equipment...

Jay-gon Jinn
08-29-2008, 01:57 AM
You can have him do it if you get a hilt from him....I did and am currently in the process of making a brass sleeve for the one I bought fro him nad plan on running a P4 white with filters in it off an MR board.

Lord Dottore Matto
08-29-2008, 11:06 AM
Gracias Jay-gon:wink: