View Full Version : Older MR FX Blades
nmfiredawg
03-11-2006, 10:13 PM
I know that the tutorial talks about the new 3V Vader lightsaber being used for conversion to LED. What about the older 6V systems. I have a couple of these lying around that I would want to convert. Are they harder or just impossible to do?
Strydur
03-11-2006, 11:45 PM
I will address the older ones as I get time also.
Tim
The Custom Saber Shop
LAN-ED-TUL
03-12-2006, 12:55 AM
i think it was said before that fit of components was the major problem on the 6 battery jobbers.
You dont know the POWER, of the dark side...
nmfiredawg
03-12-2006, 02:41 PM
Well I hope Tim comes up with something, and if they do fit I think it will be an easier conversion. I took one of mine apart today. Two screws took the entire thing out, and then the casing that holds the blade and components had three screws. So for now I have the blade off and waiting, at least I can hang it on my belt when I am trooping.
LAN-ED-TUL
03-12-2006, 08:48 PM
tim might be workin on something for that/ just have to wait and see i guess.
You dont know the POWER, of the dark side...
Hopcake
03-27-2006, 02:34 PM
I'd like some info too, specificaly the '03 Vader.
First Problem: Broken Switch. There's 4 wires (numbered 1-4 on the board) that I'd like to connect to a sabershop standard switch (only 2 wires)
Second Problem: Wiring up to the luxeon. Clash sensor has 3 wires, main connector only has 7, as opposed to the '05 which has 2 and 8, respectively.
Any tips, hints, or info on how to cut down on the basic trial-and-error I'm facing, PLEASE hit me back!
Kyp Durron
03-27-2006, 07:21 PM
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by nmfiredawg
Well I hope Tim comes up with something, and if they do fit I think it will be an easier conversion. I took one of mine apart today. Two screws took the entire thing out, and then the casing that holds the blade and components had three screws. So for now I have the blade off and waiting, at least I can hang it on my belt when I am trooping.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
What model are you referring to that only took two screws to take it apart? [?]
UltraSWG
03-27-2006, 08:16 PM
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Hopcake
I'd like some info too, specificaly the '03 Vader.
First Problem: Broken Switch. There's 4 wires (numbered 1-4 on the board) that I'd like to connect to a sabershop standard switch (only 2 wires)
Second Problem: Wiring up to the luxeon. Clash sensor has 3 wires, main connector only has 7, as opposed to the '05 which has 2 and 8, respectively.
Any tips, hints, or info on how to cut down on the basic trial-and-error I'm facing, PLEASE hit me back!
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
I replied to your post on TFN
http://www.ultrasabers.com
Corbin|Strydur|Ultra
The Holy Luxeon Trinity
nmfiredawg
04-01-2006, 12:20 PM
It is the 2003 Vader
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.