CorellianBada**
06-22-2008, 01:44 PM
My 1st finished saber !!!!!!!!!
1.25 sink tube core, with 1.5 sink tube cutaway over Wilson tennis grip taping. 1 PVC ring above handgrip painted emerald pearlcoat (vehicle paint) with Tim's latching switch, sink tube adapter (also in emerald pearl coat) and blade holder 4.
Green LUX III, sans resistor and all electronics mounted with no soldering. DO NOT BUY "COLD HEAT" SOLDERING IRONS, THEY'RE USELESS!!!!!
thick-walled 1" blade with aluminum cap-mirror and Tim's diffuser.
no sound :(
1.25 sink tube core, with 1.5 sink tube cutaway over Wilson tennis grip taping. 1 PVC ring above handgrip painted emerald pearlcoat (vehicle paint) with Tim's latching switch, sink tube adapter (also in emerald pearl coat) and blade holder 4.
Green LUX III, sans resistor and all electronics mounted with no soldering. DO NOT BUY "COLD HEAT" SOLDERING IRONS, THEY'RE USELESS!!!!!
thick-walled 1" blade with aluminum cap-mirror and Tim's diffuser.
no sound :(