PDA

View Full Version : MR connector and switch



wood7588
02-24-2006, 10:28 PM
I have a MR sound/power board that I want to use in a project but it does not have a switch or the white plastic connector for the shock sensor. The switch should be easy, it is just a on/off contact switch(please correct me if I am wrong so I dont blow it up) but does anyone know were to find the connector?

edit - I am not even sure what the connectors are called so I have been unable to look then up online. If you know their name that would even be a great help.

Thanks

wood7588
03-07-2006, 01:32 AM
I am so happy that I have to update this thread. After a long search I finally have aquired some of the white connectors for the MR power/sound boards. If anyone is interested they are Molex connectors part number 87369-0800 and require 8 internal crimp pins part number 50212-8100. They were a pain to come by, most places wanted you to buy them by the thousands. I was able to get some direct from Molex as samples. Just thought I would let you know.

xwingband
06-15-2006, 05:18 PM
Okay, I need some help now.

What is the actual name of these types of connectors? I need a three pin and two pin version for sure. I've seen these types on battery packs, quick disconnects... BUT what in the world are they called?[?]

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>