PDA

View Full Version : just want to confirm



morpheus1977
05-04-2008, 11:56 AM
I am driving my lux 3watt off of a master replicas vader 03 quick disconnect. I want to use my current 4 AAA battery set up. This will not fry my board correct?

Jay-gon Jinn
05-04-2008, 12:12 PM
No, 6 volts is about the maximum for any MR board, it should be fine. If it worries you, though, just use some NiMH batteries in it instead. Then you'll top out at about 4.8 volts, except when fully charged, when the batteries may be putting out 5.2 volts.

morpheus1977
05-04-2008, 12:15 PM
No, 6 volts is about the maximum for any MR board, it should be fine. If it worries you, though, just use some NiMH batteries in it instead. Then you'll top out at about 4.8 volts, except when fully charged, when the batteries may be putting out 5.2 volts.

Thats what I thought I just wanted to make sure (I only have one MR board and I dont want it to do the magic smoke trick)