PDA

View Full Version : Speaker Mounts



thornwolf
04-17-2008, 06:48 PM
Its alway the simple things.

I have my soundcard all wired and it works, but I shattered my speaker mount trying to put it in my hilt. Is there a "right" way that I'm screwing up? If I mount the speaker in the mount, the pommel doesn't screw in. When I turn it over the pommel screws in fine, but the speaker mount seems upside down to me. Sorry to ask a really dumb one, but I'm so close to being finished I'm sure I missed something obvious.

vortextwist
04-17-2008, 07:21 PM
I have never used one yet but here's the pics from the store.

http://www.thecustomsabershop.com/ProductImages.aspx?ProductId=99
http://www.thecustomsabershop.com/ProductImages.aspx?ProductId=99

Dark Helmet
04-17-2008, 07:31 PM
face the speaker cone into the beveled part of the mount,this way the pommel isn't resting on the edge of the speaker and it will fit better that way. if it's just a matter of the mount not seating, you can sand the sides so it will slide in better, but keep in mind the more contact with the sidewalls of the hilt the more resonance you will get.