PDA

View Full Version : Screw for blade problems



chou0201
02-18-2006, 12:58 PM
Does anyone know wut size of screw is for the completed blade from the shop. I have spent my whole afternoon looking for that size of screw in Homedepot and still can't find that thing...[xx(]
And does anyone know where can I find that size of screw near Vancouver, Canada? Since there's no lowe here...
Millions of thx

Madcow
02-18-2006, 05:46 PM
Dude, I'm in Victoria!
Cheers.

Are you talking about the tightening screw that holds the blade in the saber?

MC



You want to go home and re-think your life

chou0201
02-18-2006, 08:17 PM
Cool....
yap, still can't find the screws that FIT into the "install set screw" on the blade I got from the shop lol.
And I think most of the radioshack is now called "source" in lower mainland now LOL.[8]

Strydur
02-19-2006, 10:43 AM
The set screw that screws into the blade to hold the mono plug in place is a 10-32 1/4" socket set screw.

Tim
The Custom Saber Shop

chou0201
02-19-2006, 08:00 PM
Just want to make sure again...and again...
the screw I need to hold the blade would be 10-32 1/4'
or 8-32?
Or as long as it's 1/4'?
not really familiar with all those hardware stuff [xx(]

Madcow
02-19-2006, 08:26 PM
Hey,
I know you can get the screws from Tim. But if you have nothing else to order at the moment... I would reccomend going to Home Hardware. I get all my set screws there.

MC



You want to go home and re-think your life

chou0201
02-19-2006, 10:00 PM
Thx man, I will try to find it tomorrow.
Millions of thx!!!!!!!!!![:D]