PDA

View Full Version : MR to EL?



gtitian
11-10-2005, 03:39 AM
I am very interested in converting a MR (Force FX saber)to EL. I want to maintain all the sound FX in the MR saber, but convert the blade to an EL blade, and also sturdy everything up a bit for dueling. Could such a thing be done? it seems to me it could... but what do I know? In general the Luxeon set up seems to not look as good as the EL blades, but maybe thats just the picture... so I want to go with an EL blade. Anyone got anything on this?

Strydur
11-10-2005, 08:47 AM
It is somewhat possible. The main problem you would have to get past is the low voltage the MR puts out. With only 4.5v it is not enough to power the inverters I sell to a decent level. You might be able to find a inverter made for lower voltage though.

Tim
The Custom Saber Shop

gtitian
11-11-2005, 08:58 PM
Ok, another approach, is it possible to reinforce an MR blade for dueling? We wont change the original LED set up, no luxeon, just basically swapping the 1/16 lexan for a 1/8 inch lexan, and maybe add some shock absorbing bushings to prevent damage to the LED connections? This seems like it would be fairly simple.

Strydur
11-11-2005, 11:33 PM
I doubt it, the MR led are surrounded by foam anm and they still break from the shock. It might make them last longer but another problem you would have is fitting the MR setup inside a 1/8" walld tube since the inside diameter is smaller.

Tim
The Custom Saber Shop

darkjedimaster07
09-06-2006, 12:17 PM
it would probably be alot easier to just buy one of tims conversion kits for the MR youd probably end up saving money in the long run anyways

BEING DARK DOSEN'T MAKE YOU EVIL JUST... MISUNDERSTOOD

Lord Maul
09-06-2006, 03:07 PM
with tim's blade the light is darn near even. there is no bulb at the tip and only a small flare at the hilt. it would be TONS easier to just buy one of his conversion kits

<center>http://film.onet.pl/_i/news/duze/d/darth_maul_1.jpg

http://www.clicksmilies.com/s0105/starwars/star-wars-smiley-026.gif At last we will reveal ourselves to the jedi, at last we will have revenge. http://www.clicksmilies.com/s0105/starwars/star-wars-smiley-026.gif
</center>

xwingband
09-06-2006, 03:42 PM
If you were that keen on EL you could keep the base stuff sans electronics. If you got li-ion AA's the base battery pack could then send 11.2V to the inverter. Modding the stuff to put in the mono jack would probably be harder...

EDIT I forgot... darkjedi should be called the necromancer for pulling up all of these old threads.[:D]

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

james3
09-06-2006, 03:45 PM
Quit repeating the same thing that someone just posted you friggin moron.



<center>http://i43.photobucket.com/albums/e370/Dadof3/ErrorMessage.png</center>

<center>http://i43.photobucket.com/albums/e370/Dadof3/kotor2.jpg</center>

WeirdoTransvestite
09-06-2006, 06:25 PM
Glad to see that image's being put to good use.

---------------------------------------------------------------------
Misato Katsuragi: The one who deserves to survive is the one who has the will to do so.
-Neon Genesis Evangelion

Gott weiss ich will kein Engel sein
-Rammstein
http://i8.photobucket.com/albums/a15/WeirdoTransvestite/LaughingManROTATE.gif Contains 100% your daily recommended dose of Laughing Man

james3
09-06-2006, 06:53 PM
And of course props to WT! Who has made it in to TCSS Archives with an eloquent display such as that.


<center>http://i43.photobucket.com/albums/e370/Dadof3/kotor2.jpg</center>

Lord Maul
09-06-2006, 07:06 PM
you guys are just plain mean [:(!][V][:(]

<center>http://film.onet.pl/_i/news/duze/d/darth_maul_1.jpg

http://www.clicksmilies.com/s0105/starwars/star-wars-smiley-026.gif At last we will reveal ourselves to the jedi, at last we will have revenge. http://www.clicksmilies.com/s0105/starwars/star-wars-smiley-026.gif
</center>

Do-Clo
09-06-2006, 09:56 PM
Mean but never plain[:D]

<center>http://i48.photobucket.com/albums/f217/Do-Clo/DoCloSig.jpg</center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Darth Technous Sith Lord</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Give yourself to the Dark Side</font id="Comic Sans MS"></font id="size4"></font id="red"></center>

Lord Maul
09-07-2006, 03:35 PM
i said what i meant and i meant what i said, you guys are mean AND plain Do Clo

<center>http://film.onet.pl/_i/news/duze/d/darth_maul_1.jpg

http://www.clicksmilies.com/s0105/starwars/star-wars-smiley-026.gif At last we will reveal ourselves to the jedi, at last we will have revenge. http://www.clicksmilies.com/s0105/starwars/star-wars-smiley-026.gif
</center>

Do-Clo
09-07-2006, 03:38 PM
<center>http://i43.photobucket.com/albums/e370/Dadof3/ErrorMessage.png</center>






<center>http://i48.photobucket.com/albums/f217/Do-Clo/DoCloSig.jpg</center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Darth Technous Sith Lord</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Give yourself to the Dark Side</font id="Comic Sans MS"></font id="size4"></font id="red"></center>