digiwalker
03-25-2008, 09:04 AM
I am considering purchasing a CF v3, and was wondering if I could use a proximity capacitance switch like the one at the following URL:
http://www.djandassoc.com/Faraday/faraday-x.html#Faraday%20Switch%20Typical%20Applications
It has both momentary and latched output. I would use the saber hilt as the touch plate, so if I set down (or dropped) the saber, it would power down.
I assume I would have to add a timer circuit so it didn't shut off
during hand switching and such.
Anyone have any thoughts on something like this?
http://www.djandassoc.com/Faraday/faraday-x.html#Faraday%20Switch%20Typical%20Applications
It has both momentary and latched output. I would use the saber hilt as the touch plate, so if I set down (or dropped) the saber, it would power down.
I assume I would have to add a timer circuit so it didn't shut off
during hand switching and such.
Anyone have any thoughts on something like this?