PDA

View Full Version : Guarded switches



Moro Kadon
03-19-2008, 11:06 AM
I'm very interested in the guarded switches being offered in the store--which are yet to be in stock as of yet, it seems. Currently, I haver two questions. Three, perhaps, if the first is not clear enough. First, just how would one go about mounting the switch, if the nut is supposed to be on the inside of the hilt, and consequently, can I have a tutorial on how to do so? Thirdly, would it be possible to have the switch hole in my hilt made bigger to accommodate the guarded switch?

xl97
03-19-2008, 02:23 PM
I believe Tim posted that you can MARK your purchase to be drilled for that special switch in the services section... =)

Moro Kadon
03-19-2008, 09:55 PM
While that does help me, I wanted to know if I could get the hole bigger in a hilt-section I already own. I wouldn't want to have to buy another hilt-section just for a new switch-hole. That would just be ridiculous.

xl97
03-20-2008, 05:40 AM
I didnt realize it was a hilt which you ALREADY had..

Strydur
03-20-2008, 11:59 PM
If you want to pay to send it in and back to you then I dont see why not. Its not that hard to get the nut on the inside if the switch is somewhat close to an end.

Moro Kadon
03-22-2008, 01:16 AM
I didnt realize it was a hilt which you ALREADY had..

Oh, well, no fault of yours, then. Appologies.^_^;