Will these 2600mAh li-ion fit a CF MHS?

[Mad Hatter]

Can anyone tell me if these 2600 mAh li-ion batteries would fit an MHS with CF if you packed the batteries end to end, instead of side by side? They are 18mm diam.

http://batteryjunction.com/tenergy-18650-tab-2600.html

I haven't got my saber parts in the mail yet, but I'm assuming that these are going to be too big. (Otherwise it seems that people here would be using them...)

Thanks

[chase]

The diameter is whats going to matter in the saber. Since it's 18.4mm (max) diameter it will equal out to about .73in (max) and 64.8mm equals about 2.5in long. So yes, it should work, unless I'm retarded and the internet is lying to me about conversions.

[Mad Hatter]

I know it will fit the saber, but will the diameter fit with a Crystal Focus board on top?
(length is ok)

[Hasid Lafre]

I think there bigger than AA and a cf wont fit on top of a AA pack in the mhs.

[Mad Hatter]

Okay. So a CF won't fit on top of 2 AA. Time to make a new plan...

Does anyone know if the CF will sit on top of 3 AAA's if they are allowed to rest in the bottom of the hilt like in this image? The image is to scale.
ID of MHS is 31mm.
OD of each AAA is 10mm.

The idea is that the CF could sit on a 6xAAA pack, or, even better, a 2S3P li-ion AAA pack.

[eastern57]

in your configuration, yes, the cf will fit over 3 aaas in mhs [double threaded] hilts. How are you going to secure them? Because they'll roll around... just a thought...

[Hasid Lafre]

shrink wrap