PDA

View Full Version : Royal Blue Led Questions- 1st timer



thornwolf
03-06-2008, 12:08 PM
I had a few questions regarding my first saber set up.

I plan on using a 36 inch TCSS battle blade:

Is the difference between LuxIII and V for a Royal Blue signifigant?

If I go the LUX V route are there any disadvantages to the 9v verses the 6AAs (since they won't fit in my hilt). i have read the 9v doesn't keep power as long, but how long would a 9volt be good for?

Finally, as I have no frame of reference how much brighter is a LUX III or V with a resistor vs a Driver?

Trying to keep it simple, since this will be a dueling blade that won't have sound or any thing too advanced.

xwingband
03-06-2008, 12:20 PM
Yes, the difference will be noticable.

A 9V will last a half hour if you're lucky. IMO I'd make space because 9V's are expensive and it will pay for itself in the end.

thornwolf
03-06-2008, 12:29 PM
If using all MHS pieces, how much longer do I have to make the hilt to fit the 6 AA pack?

Right now its simple. emitter, handle, and pommel set up and I really like its look, so I would probably need a double male connector and another piece of tube.

Atomic
03-06-2008, 01:27 PM
This pack will work:

http://www.thecustomsabershop.com/72V-AA-2600mAh-NIMH-Rechargeable-battery-pack--P173.aspx

6 cells in a Triangle pack. 4" long and it will fit in a hilt section or 1.5" sink tube.