View Full Version : First post sorry if it's been asked
can i just put a mr vader in a modular hilt useing a lux 3 and if so what would i need to do it again sorry if it's been asked
Lord Maul
02-08-2008, 07:16 PM
Try reading the FAQ and Thread Index.
Yes, you can put a MR board in a MHS hilt with a 3 watter. There are wiring diagrams on the boards ;-)
AND...http://i112.photobucket.com/albums/n187/aluke_2006/Smilies/icon_welcome.gif to the forums!
Novastar
02-08-2008, 08:11 PM
Nagi, it might help to know that trying to fit an MR battery pack (6AA or 3AA) into an MHS will not be very easy without modification.
So, in order to get what you need, you may need to do the following:
* New battery pack
* New speaker
* Wire things correctly, as the MR pack would have just had pressure pins and such
Good luck!
BhujangiJedi
02-08-2008, 08:11 PM
Sadly, the links in the FAQ and Thread Index did not survive the forum upgrade. There's still some useful info in the FAQ, though.
thanks for the help and sorry for posted an already answer question
Darth_DevilGuy
02-08-2008, 09:25 PM
sometimes the info is hard to find, look at the wireing diagrams and schematics sub forum at the bottom. and also welcome!
where the post is for the diagram sorry for asking again
Lord Maul
02-09-2008, 04:38 PM
http://i112.photobucket.com/albums/n187/aluke_2006/wiringsketch.jpg
That is how you wire the battery pack and speaker. Then it's just switch leads and LED leads. Wire the LED leads like thishttp://thecustomsa.web133.discountasp.net/forum/05vader/18.jpg.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.