Moordak
02-01-2008, 08:25 AM
Hello everyone,
Thanks upfront to all the posters on here. I was able to answer all my questions and build these two sabers with no trouble thanks to all the posts on here. The amber saber was first and is totally MHS. The 2nd is sink tube/MHS. Both have Hasbro sound and recharge ports and the 2nd has the LED power bar in the hilt as well. The pic of it is kind of dark though.
Also on both, I used a Graflex glass eye as the blade retention screw. The cool thing I did though was drill down through the middle of the screw so you could see the light from the blade in the eye of the screw itself as well. The hole doesn't go all the way through the screw, just down through the threads enough to let the light from the blade light up the clear bubble on the head of the screw.
Here is the link:
http://moordakssabers.hopto.org/sabers.htm
Great site and thanks again.
Thanks upfront to all the posters on here. I was able to answer all my questions and build these two sabers with no trouble thanks to all the posts on here. The amber saber was first and is totally MHS. The 2nd is sink tube/MHS. Both have Hasbro sound and recharge ports and the 2nd has the LED power bar in the hilt as well. The pic of it is kind of dark though.
Also on both, I used a Graflex glass eye as the blade retention screw. The cool thing I did though was drill down through the middle of the screw so you could see the light from the blade in the eye of the screw itself as well. The hole doesn't go all the way through the screw, just down through the threads enough to let the light from the blade light up the clear bubble on the head of the screw.
Here is the link:
http://moordakssabers.hopto.org/sabers.htm
Great site and thanks again.