View Full Version : Confused? Is this all I need?
Drichar Deis
01-20-2008, 08:45 AM
Double threaded hilt style 3
Screw on pommel style 5
Build Your OwnLuxeon III Electronics Kit
LED "TCSS style" Battle blade 1" OD (36 inches)
Screw on LED blade holder style 3
Is that all thats needed to make an led saber?
Jay-gon Jinn
01-20-2008, 09:01 AM
Looks to me like you've got everything you need, plus something extra...what do you need the 1.5" sinktube adaptor for? That part is for attaching a blade holder or pommel or other MHS part to a hilt made from a chrome/brass sinktube. You really don't need it for the hilt you have the MHS parts for.
DarthFender
01-20-2008, 09:52 AM
Add also, you'll probably need batteries.
37H4N
01-20-2008, 09:58 PM
Whoa 30 inch blade? You do know the blade goes in the holder about 1 1/2 inches right? If your wanting a 30 inch blade, get a 32 inch and cut off some if you need to.
Hasid Lafre
01-21-2008, 05:29 AM
2 bladeholders and one eletronics kit?
YEah I would get a longer blade and trim it to fit when you start to play with it.
A friend of mine bought a 30"blade and wished he got one longer.
Drichar Deis
03-02-2008, 10:55 AM
Stupid question?
What holds the blade in?
thumbscrew?
Glue?
Malaki Skywalker
03-02-2008, 11:20 AM
Stupid question?
What holds the blade in?
thumbscrew?
Glue?
Thumbscrew, Tim offers a service in the shop
Drichar Deis
03-02-2008, 11:23 AM
I think i remember reading somewhere that one type of the screws fits under the blade holder?
help?
Malaki Skywalker
03-02-2008, 11:34 AM
I think i remember reading somewhere that one type of the screws fits under the blade holder?
help?
Theres a thumbscrew and then theres a set screw, setscrew gives an nearly invisible look which uses an allen wrench, then theres the good old thumbscrew which well uses your thumb and finger lol
Barmic Rin
03-03-2008, 06:25 AM
I use a set screw on my personal one, but thumb screws on a few others.
It depends on the look you're going for.
And i'd definitely go for a longer blade.
Realistically, a 32" -36" would be best.
Whta is the MHS to 1.5" sink tube adapter for? Doesn't seem to go with the rest.
Drichar Deis
03-04-2008, 02:35 AM
oops, keep forgetting to edit that,.........done!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.