PDA

View Full Version : Will it fit?



RebelJedi1210
01-12-2008, 12:54 PM
Hi, I was wondering if the "Corbin Style" 1in. OD blade would fit a Lux 3 Luke ROTJ. It is a MR saber converted by Ultrasabers, but TCSS blade looks better than the Ultrablade.

So, does it fit?

Thanks in advance,

RebelJedi1210

Strydur
01-12-2008, 01:04 PM
It should fit fine.

Lord Maul
01-12-2008, 01:48 PM
No Malaki, that isn't true for all his conversion.

The preconverted Mauls, Anakins, Vaders, Vader to Anakin AOTC sabers will not fit a standard 1 inch blade.

The DIY Anakins, Vaders, Vader to Anakin AOTC sabers will not fit a standard 1 inch blade. The DIY Maul sabers do fit the one inchers though.

Malaki Skywalker
01-12-2008, 02:04 PM
No Malaki, that isn't true for all his conversion.

The preconverted Mauls, Anakins, Vaders, Vader to Anakin AOTC sabers will not fit a standard 1 inch blade.

The DIY Anakins, Vaders, Vader to Anakin AOTC sabers will not fit a standard 1 inch blade. The DIY Maul sabers do fit the one inchers though.

Im only a noob :lol:

RebelJedi1210
01-12-2008, 10:30 PM
So, what about the Luke ROTJ? :confused:

Lord Maul
01-12-2008, 10:39 PM
Listen to Strydur you must. It will fit, Ultra uses a metal bladeholder for that model.

Do-Clo
01-13-2008, 01:55 AM
With a BFH-9000 anything will fit:mrgreen:

You can always take some fine sand paper and sand the bottom of the blade if it is too tight.

DarthFender
01-13-2008, 08:27 AM
With a BFH-9000 anything will fit:mrgreen:

I gotta get me one of those. I still haven't upgraded from the BFH-700 series.

Lord Maul
01-13-2008, 11:20 AM
http://i112.photobucket.com/albums/n187/aluke_2006/Funny%20Pictures/BFH9000.jpg