MR switch

[Maliki Skywalker]

I need to know how to wire up one of Tims latching switches to an MR board, i cant figure it out... :?

Point it out if its that obvious
:oops: :lol:

Thanks guys! :D

[vortextwist]

which mr board. vader/maul the wires are yellow. blue is obi.
the luke/mace is purple.

http://www.thecustomsabershop.com/forum/viewtopic.php?t=1067

[Maliki Skywalker]

Its an Ani 05 board. :)

[TheCheeker]

i believe that board is the same as the esb vader which is what i have. my setup includes corbins board so this is the only pic that i have:

http://www.geocities.com/theronroxbon/wiring.jpg

this should help even though its more than what you need. the 2 blue wires (i dont think they're blue on the actual board tho) go to the switch. there is no positive or negative orientation on the switch so you don't have to worry about that.

[vortextwist]

ya it may say on the board but. there should be red/black/brown and the other 2 are switch.

[Jay-gon Jinn]

The switch wires on the ani board are blue. Wire it like this:
http://i119.photobucket.com/albums/o141/Jay-gon_Jinn/Arons%20training%20saber%20sound%20mods/arons-training-saber-sound-mod-3.jpg
This is a vader board, which is similar to the Ani. The two yellow wires are the switch wires. The brown is the negative for the speaker, the red is battery and speaker positive, and the black is the battery negative.