PDA

View Full Version : switch hole + ribbed extension



Tenric Starkindler
09-19-2007, 05:34 PM
quick question for the veterans here....
is there enough room to place a switch hole in the smooth part of the ribbed extension just behind the threaded portion?

Looks close from the pictures......

Stinky Bantha
09-19-2007, 05:51 PM
Should be fine. I've got one of Tim's machined covertech knobs in that area and it only hangs over the groove a little bit.

Lord Maul
09-19-2007, 08:15 PM
If you're talking about one of the 3/8 inch switches tim sells, then no.

Tenric Starkindler
09-19-2007, 09:10 PM
Thank you both...I had thought as much for the switch
and
Stinky Bantha answered the question I forgot to ask as well !

Strydur
09-23-2007, 11:35 PM
The switch hole can go in the grooved section though.

Tenric Starkindler
09-24-2007, 05:54 PM
Thanks Strydur.
Not sure if that solution would fit the design I am trying to accomplish though......sure wish there was a 5" Fem/Fem ribbed section with one end long enough for a good switch hole.........

TimeRender
09-25-2007, 09:11 AM
A 5 inch F/F ribbed extension... Well Tenric, the ribbed extension pieces are 3.7, and Tim sells a 2 inch F/F extension piece, together that is 5.7 inches, and that's not much longer than what you just requested. Maybe you could try that.