PDA

View Full Version : ProLight 4W RGBY Emitter



Stu Uk
01-19-2006, 06:58 PM
Whilst researching for a LED to install i my very first saber, i came across the ProLight 4W RGBY Emitter.

Would i be able to use this or would i be better off using a standard Luxeon 3 white with coloured disks?

Also if i were to use the RGBY, can anyone suggest a way of operating the colours without the need for loads of switches?

Thanks,
Stu

"In darkness, there is strength"

xwingband
01-19-2006, 07:23 PM
Umm... only a few topics down. "white LED w/filters vs RGB LED?"

http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=269

<center>http://www.dewbackwing.com/dewbacks/files/pinupbanner.jpg
www.dewbackwing.com</center>

dbraxton9
01-19-2006, 09:46 PM
hey that LED looks like a cool idea. what sort of modifications would be necessary to make it fit in a TCSS saber hilt? 4w is hotter, right? what sort of battery power does it require?

"Look at me! Judge me by my size do you? And well you do not! For my ally is the force, and a powerful ally it is!

Darth_Dadderall
01-21-2006, 12:33 PM
In my search for the perfect switches for my project, I came across a series of small rotary switches that might fill the bill. In a Graflex mod, you could theoretically mount it in one of the famed "blade adjust" locations. The wiring of the switch could be a little tricky, and since I don't know what the terminals on that multicolor are like, I can't answer specifically your question, except to say go to digikey.com and search for switches, then apply filters as you think fits. Good luck!

What is life but the passage to death?

xwingband
01-21-2006, 12:57 PM
Yeah, if you wanted to mix colors use a potentiometer (sp?). Otherwise a rotary or multi position slide switches would probably be the way to go. I don't think a rotary switch would work in a graflex since it's not actually a twisting part. The "blade adjusts" are actually buttons for the flash that are screwed on the save space on the inside.

<center>http://www.dewbackwing.com/dewbacks/files/pinupbanner.jpg
www.dewbackwing.com</center>

Darth_Dadderall
02-12-2006, 12:25 AM
Yeah, but consider, Xwing, that the hole could be drilled out for the rotary switch and a twister knob machined, MAKING the blade adjust knob actually functional. It'd be a little tight inside, but I bet you could make it work.

What is life but the passage to death?