Strydur
04-26-2007, 12:03 AM
http://www.thecustomsabershop.com/pc-896-25-mr-maul-conversion-kit.aspx
Kits are now in stock. They feature a copper slug for better LED cooling. I will do a tutorial as soon as I can. Basically you just take apart the saber and remove the plastic tube that holds the blade and slip this assembly in its place. If you notch it slightly you can even reinstall the cross pin.
Kits are now in stock. They feature a copper slug for better LED cooling. I will do a tutorial as soon as I can. Basically you just take apart the saber and remove the plastic tube that holds the blade and slip this assembly in its place. If you notch it slightly you can even reinstall the cross pin.