MR Vader

[Usernames suck]

I just got a (defective) vader off ebay but it is pretty much brand new and there are no problems with it at all. I just cant remove the small pin that holds the switch to the saber. HELP!!!!!

The opression of the Sith will never return, you have lost - mace windu

[Wolverine]

You can pull it out with diagonal cutters, or needle nose plyers (a good pair)[:)]

[Usernames suck]

I can't get the assembly to come out of the hilt...Help


The opression of the Sith will never return, you have lost - mace windu

[Wolverine]

First remove the battery pack/speaker,then if you have your switch tucked in, <u>if</u> you have a poly C tube on hand, you can use it to push the assembly out the top of the hilt through the battery compartment. If you don't, look for a something with a flat end, and avoid puching against the contacts.[8D]

[Usernames suck]

Tim,

I was wondering if you had any red led strips for the vader cause mine has a couple burned out but when I went to put some leds to replace them it wouldnt work.. Any tips on how to fix this?

The opression of the Sith will never return, you have lost - mace windu