Trouble shooting a Nano Biscotti V3

[Tryagain Infinity]

So I took apart my Nano Biscotti V3 saber to use the SD card to transfer some files. I was an idiot and forgot to unscrew the saber holder. So the wires got yanked on.

Now when I removed the kill key it does make a startup sound and is charged, but it won't light up.

Could using the SD card that way cause such a problem?
Or, do I need to test the wiring with a multimeter, or some other method?

Looking for the best method here. Thanks.

<Edit: spelling and grammar>

[Forgetful Jedi Knight]

I’d check ALL of your wiring first. If something was “yanked on”, something probably came loose/apart.

After that, I’d review all of your configuration files, to make sure they’re ok.