tw0leftskis
06-01-2020, 02:47 PM
Spent my 3 day weekend to build Ahsoka Shien saber. It's powered by CFx with neopixel setup. Only thing missing is a 36" blade.
I tried doing tri cree, it was a pain to install the heat sink and the side main/aux button.
I'm in Orange County, CA.
If anyone here is local and willing to let me try their neopixel blade that would be appreciated.
Spent my 3 day weekend to build Ahsoka Shien saber. It's powered by CFx with neopixel setup. Only thing missing is a 36" blade.
I tried doing tri cree, it was a pain to install the heat sink and the side main/aux button.
Finally figured out why my pixel blade only lit up one string. 2 of the led got detached from the strip
Repaired the issue. Blade is working properly. Just need to diffused the led.
Installed FSC BT630. Didn't realized I need to change logport setting from 0 to 2 for the communications
I tried doing tri cree, it was a pain to install the heat sink and the side main/aux button.
I'm in Orange County, CA.
If anyone here is local and willing to let me try their neopixel blade that would be appreciated.
Spent my 3 day weekend to build Ahsoka Shien saber. It's powered by CFx with neopixel setup. Only thing missing is a 36" blade.
I tried doing tri cree, it was a pain to install the heat sink and the side main/aux button.
Finally figured out why my pixel blade only lit up one string. 2 of the led got detached from the strip
Repaired the issue. Blade is working properly. Just need to diffused the led.
Installed FSC BT630. Didn't realized I need to change logport setting from 0 to 2 for the communications