Blade Side Adapter Question

[winterg]

I am working on my neopixel build and just got the hilt side adapter for the PCB but it does not stay in.

Parts I have are:

MHSV2 Blade Holder Style 8
MHS V2 Choke Style 1
1" NeoPixel Hilt Side Adapter V2

Shouldn't the Hilt Side adapter lock in place between the choke and the blade holder? It just slides out the front. Is there a piece I am missing?

https://live.staticflickr.com/65535/49036009227_cc1c5fe96a_z.jpg (https://flic.kr/p/2hH9n9X)

[darth_chasm]

I believe the only one that locks in place is this one but it is for MHS V1 https://www.thecustomsabershop.com/MHSv1-NeoPixel-Hilt-Side-Adapter-V2-P1341.aspx

For the one you have you could do a set screw or reverse set screw set up to hold it in place. I've done it, Vader's Vault does it and many others have done it this way. It works well.

[Forgetful Jedi Knight]

I believe you are missing the 1” aluminum can, as shown below.

https://www.thecustomsabershop.com/NeoPixel-Hilt-Side-LED-Module-Adapter-V2-P1349.aspx

[darth_chasm]

Nice! I didn't see that. That would definitely be better!

[winterg]

I believe you are missing the 1” aluminum can, as shown below.
https://www.thecustomsabershop.com/NeoPixel-Hilt-Side-LED-Module-Adapter-V2-P1349.aspx

Ahh. Thank you. I'll add it to my next order.