PDA

View Full Version : Simple FoC CFV8



Matt Rogers
06-26-2019, 11:09 PM
Ok, so, I'm having to start over due to poor quality wiring, so I just want to get that out of the way. However, I had everything wired up and ready to go, triple checked my wiring, made sure it was correct, pulled the kill key, got the boot up sound, and turned in the saber. Sound was no issue, but, the main LED die was not on. When I tapped it for a clash effect, it lit up as FoC(red blade with amber FoC). Any ideas as to what would cause this? Is this a settings issue?

Forgetful Jedi Knight
06-27-2019, 09:17 AM
Usually, yes. You may have to remove your override configuration file, or just shift through the profiles until you get what you want. See manual for details.