MPP 2.0 parts list

[Revan0085]

Hi.

I have just purchased the Korbanth MPP 2.0 empty hilt to convert into a full LED white on clash ROTJ version. I have never built a saber before but am looking forward to the challenge but I need some help with the parts I need to start.

So far I have identified the following that I need.

MPP 2.0 Chassis
https://www.thecustomsabershop.com/MPP-20-Chassis-Red-P1279.aspx?ItemId=506036

.875 OD sink module with center hole
https://www.thecustomsabershop.com/875-OD-Heatsink-module-with-center-hole-P1138.aspx?ItemId=506494

7.4v Li-ion battery 2600mAh 18650
https://www.thecustomsabershop.com/74v-Li-ion-2600mAh-18650-Battery-Pack-P699.aspx?ItemId=506495

2W 28mm Bass Speaker
https://www.thecustomsabershop.com/2W-28mm-Bass-Speaker-P662.aspx?ItemId=506496

Nano Biscotte Sound Module V4
https://www.thecustomsabershop.com/Nano-Biscotte-Sound-Module-V4-P806.aspx?ItemId=506498&Kits=850%2c964

18deg Tri-Rebel/Cree Star Lens
https://www.thecustomsabershop.com/18deg-Tri-RebelCree-Star-Lens-P778.aspx?ItemId=506500

Custom Tri-Cree LED modified for the OD sink
https://www.thecustomsabershop.com/Custom-Tri-Cree-LED-with-modified-base-P1139.aspx?ItemId=506508&Kits=1153%2c1229%2c1230%2c1168

Star thermal tape pad
https://www.thecustomsabershop.com/Star-thermal-tape-pad-Tri-LED-P1143.aspx?ItemId=506503

Are these the correct parts to build a complete saber? Am I missing anything I need to add to this list? Also what recharge port is best for this model/chassis?

Any help and feedback would be greatly appreciated.

Thanks,

Mike