View Full Version : Kill Key
deviltronix
03-28-2018, 07:18 PM
Question:
Is it safe to us a homemade kill key using a 2.1mm plug taken from old laptop charger? I clipped it and added a decorative cap so nothing is exposed.
Thanks
Hdjoe
03-28-2018, 08:01 PM
I wouldn’t if it’s metal... just use non conductive material
darth_chasm
03-28-2018, 08:08 PM
I wouldn’t if it’s metal... just use non conductive material
^^ this
PCModulus
03-29-2018, 06:04 AM
It doesnt matter what material its made of, if its not solid, the circuits arent combined unless you connect the wires coming out. I find that a kill key is only needed when you are building a saber, after that, if you use it enough to have to charge it, just charge it. Otherwise, the deep sleep will be fine.
deviltronix
03-29-2018, 06:23 AM
Thanks! During soldering was the intent.
PCModulus
03-29-2018, 06:36 AM
Thanks! During soldering was the intent.
No prob. Im finding that a lot of this stuff is made to be way more complicated than needed and people just get stuck in a groove of doing things one way and never trying something different.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.