PDA

View Full Version : NBv4 Install Questions


hutch009
02-11-2018, 04:33 PM
Hello all

I have noticed that a lot of people install the NBv4 upside down in the chassis. Is there anything special that has to be done to the chassis or the card? Do people place double sided foam tape between the card and the chassis?

Thanks in advanced
PCModulus
02-13-2018, 02:30 PM
In what chassis? I install with SD socket facing up.
hutch009
02-13-2018, 02:43 PM
In what chassis? I install with SD socket facing up.

I'm using this one http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx
PCModulus
02-13-2018, 03:32 PM
http://pcmodul.us/jeff/DSC00408.JPG
hutch009
02-13-2018, 08:00 PM
Cool, is that heat shrink on the soundboard and it looks like it is sitting on top of something I am assuming that is double-sided tape? just curious what is the red thing in the rim of the chassis?
PCModulus
02-13-2018, 10:53 PM
I used double sided tape, but left the plastic on it so only the heat shrink holds it to the carbon fiber Kydex. The red thing is the kill switch. Its actually not the rim, its a cap i machined.