View Full Version : Need a blade dust cap?
PCModulus
02-06-2018, 02:31 PM
Here's an insanely cheap one that you probably throw away everyday.
Take a lid from a 16.9 oz bottle (usually water), trim the threads out of it with a knife or razor blade and snap on.
http://pcmodul.us/images/WP_20180206_10_41_15_Raw.jpg
http://pcmodul.us/images/WP_20180206_10_41_26_Raw.jpg
http://pcmodul.us/images/WP_20180206_10_41_37_Raw.jpg
Jediseth
02-06-2018, 02:44 PM
Cool idea! I don’t think I’d use one, but very inventive.
bigkevin61
02-06-2018, 05:21 PM
Much more elegant than the blue painter’s tape I’ve been using!
Tom Tilmon
02-06-2018, 07:46 PM
chair feet from a hardware store, either 1" or 7/8" diameter!
bigkevin61
02-06-2018, 09:08 PM
chair feet from a hardware store, either 1" or 7/8" diameter!
Ya, if you want to pay for them. :p
PCModulus
02-06-2018, 10:06 PM
Ya, if you want to pay for them. :p
I was gonna say i dont remember the last time i drank a chair lol :)
Greenie
02-07-2018, 03:04 AM
Clear plastic disc glued in place.
jbkuma
02-07-2018, 06:42 PM
Greenie got it, just glue a bit of clear plastic to the end. The you can just glue a scrap of the gift wrap you probably used as a diffuser then trim it down.
bigkevin61
02-07-2018, 07:53 PM
Greenie got it, just glue a bit of clear plastic to the end. The you can just glue a scrap of the gift wrap you probably used as a diffuser then trim it down.
I typically do not glue my dust caps on my blades. (Got to take it off to use the blade!)
I think the pictures are getting people thinking this if for a blade plug.
;)
PCModulus
02-07-2018, 08:09 PM
I typically do not glue my dust caps on my blades. (Got to take it off to use the blade!)
I think the pictures are getting people thinking this if for a blade plug.
;)
It comes from reading books with pictures and no words :mrgreen: Kidding aside, people tend to look at pics vs reading text it seems these days.
jbkuma
02-08-2018, 12:38 AM
I typically do not glue my dust caps on my blades. (Got to take it off to use the blade!)
I think the pictures are getting people thinking this if for a blade plug.
;)
What I'm talking about is just gluing a bit of the clear gift wrap to the open end. Then you don't even need a dust cap because your blade is sealed and the one little bit of gift wrap is inconsequential to the operating of your fancy flashlight. It so simple once I did it I couldn't believe I hadn't thought of it earlier. I do also have a collection of chair leg caps etc that I've used in the past.
Greenie
02-08-2018, 12:52 AM
^^what JB said^^
bigkevin61
02-08-2018, 06:05 PM
What I'm talking about is just gluing a bit of the clear gift wrap to the open end. Then you don't even need a dust cap because your blade is sealed and the one little bit of gift wrap is inconsequential to the operating of your fancy flashlight. It so simple once I did it I couldn't believe I hadn't thought of it earlier. I do also have a collection of chair leg caps etc that I've used in the past.
Ahh, NOW I see what you meant!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.