PDA

View Full Version : anyone use an anakin 2005 fx soundboard?



Proximal
03-24-2007, 07:33 PM
I just landed one off of ebay for 20 bucks and I'm still new to the whole saber making scene. It didn't come with wires or a speaker, just the board. What size speakers am I looking for and does anyone have one wired up in a pic they could post? I'm a visual person. Also, does this one have a wired motion sensor or is it built onto the board?

Thanks in advance.

xwingband
03-24-2007, 07:45 PM
Look at the Vader conversion. Wires are the same. The board will have the other three wires you need labeled. The only hitch is the positive of the speak needs to be spliced with the positive battery.

Sensor should come with it, no need to worry.

I had deja vu reading this thread... it think someone posted this same thread this week.

EDIT: Found it! http://www.thecustomsabershop.com/forum/viewtopic.php?t=2353
Same wording...

Proximal
03-28-2007, 08:03 PM
well, I wish I could say that helps but it doesn't really. I was hoping someone could just snap a pic of their board all wired up and possibly use paint to label which wires are what. Like I said, I'm a visual person.

vortextwist
03-29-2007, 01:35 PM
even in the turorials it says but here ya go

well on the anakin the
blue wires are switch

red=pos and speaker
black= neg
brown= speaker

if yours came with the clash sensor and wire plug
purple+ blue= pos to led

brown.red.orange.yellow.green= neg to led