View Full Version : 2 prong 2.1mm port question
Solocraft
11-13-2017, 11:18 AM
I came across some 2 prong/lead 2.1mm ports. Can these be wired as a recharge port? Or is that not possible, Thanks
jbkuma
11-13-2017, 12:05 PM
Do you mean it only has 2 connections and no switch?
Solocraft
11-13-2017, 03:45 PM
2 connections instead of 3, like the one sold by TCSS
Silver Serpent
11-14-2017, 01:16 PM
You should be able to charge with that, but it won't automatically cut power to your saber electronics during the charging process. You may want to consider installing a kill switch for your electronics.
Solocraft
11-14-2017, 04:15 PM
Would a latching switch on the negative wire between the battery and the sound board do the job?
Silver Serpent
11-14-2017, 08:45 PM
Put it on the negative wire between the recharge port and the board, and it'll work just fine.
Solocraft
11-15-2017, 10:05 AM
Put it on the negative wire between the recharge port and the board, and it'll work just fine.
Awesome, thank you very much for the help!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.