PDA

View Full Version : rB/B/W LED vs rB/G/W LED



Old B
10-24-2017, 10:26 PM
I’m looking to have 2 different color profiles in a NBv4. The first being a rich deeper blue and the second being an arctic blue. Both of these will be utilizing a white FoC. Which combination do you all think I should use? Also, if anybody has any recommended color values for these combinations I would greatly appreciate it.

lovetadraw
10-28-2017, 08:00 PM
Rb/G/W will give you a better Arctic Blue.

Old B
10-29-2017, 11:03 PM
Thanks. Do you have any recommended color values for the rB/G/W to get a nice arctic blue?

lovetadraw
10-30-2017, 06:31 AM
Arctic blue is usually a mix of G/rB with about a 50/50 ratio I think. I personally sometimes put a little more green in it/drop the blue a little.

Now if you want a more ESB ice blue, you can run the white at max with the blue about 50%.

Just A Jedi
12-03-2017, 12:07 PM
Arctic blue is usually a mix of G/rB with about a 50/50 ratio I think. I personally sometimes put a little more green in it/drop the blue a little.

Now if you want a more ESB ice blue, you can run the white at max with the blue about 50%.

Sorry, for a late reply, but I just saw this post. Would you still be able to get a FoC with white max out like that?

Forgetful Jedi Knight
12-03-2017, 03:57 PM
You should, it’s easy enough to configure if you need to adjust the colors a bit.

Just A Jedi
12-07-2017, 02:47 PM
You should, it’s easy enough to configure if you need to adjust the colors a bit.

Thanks, Forgetful.