16 mm AV switch install

[welshm85]

I'm adding a 16 mm AV switch as part of my upgrade to my US Aeon V4, and I can't reach the nut to install tighten the switch. Any suggestions?

[Tom Tilmon]

Screwdriver, a long one. The nut should be on the wire and fall down to the switch. Use the screwdriver to spin the nut onto the switch. It'll work, just be patient. Sometimes this is a royal pain.

Tom

[Forgetful Jedi Knight]

Depending on your setup, a short switch bezel on the inside might help you out... a lot.