NBv4 color mixing issue

[Barklight]

Hey, I just finished my first RGB build, but im having some issues.

This is what im running:

*Red/Green/Royal Blue Cree XP-E2 CopperNova
*TrustFire Protected 3.7V 2400mAh 18650 Li-Ion Battery
*Nano Biscotte Sound Module V4
*White AV switch

I have the R and G to pads 1 and 2, and the B going trough the PeX to pad 3

So, I finished wiring everything, but im having 2 issues.

The first one: my AV switch Is not lighting up, only does for a second when I change fonts on my NBv4 (holding the switch) and when the saber goes to sleep mode. I think I soldered it up to the wrong pad.
Second and main issue: my blade is only displaying one color (red, green or blue) and when I press the switch it mixes and shows the color I set up on the config files (purple for example)

Any ideas? Dunno what I did wrong.

[Tom Tilmon]

You can't change colors on the fly on the NBIV. You can set a color for each of the 3 fonts, and then you have that color for that font. As far as your illuminated switch, sounds like you have wired it to a wrong pad. Did you wire it to your power on pad? DS PAd? Photos of your wiring on your board would help.

Tom