PDA

View Full Version : FIRST BUILD - Red/Green/Royal Blue Cree XP-E2 CopperNova Question



TheRickoning
07-14-2017, 08:56 PM
HI everyone,

I am building my first saber. I picked up a Red/Green/Royal Blue Cree XP-E2 CopperNova LED which will I will wire to a PIco Crumble Light version.

I am wondering which LED is Red, Green and Blue. Is there a handy diagram of which one is which? If they are not always laid out the same, is there a nice tutorial on figuring out which one is which?

Thanks everyone. I am very excited about this build!

Thanks again for any help,

TheRickoning

jbkuma
07-14-2017, 09:06 PM
Ted is the off color one, and blue and green can figured out by briefly connecting a battery with a resistor, or just use a AA. Use a length of wire or alligator clips. Don't look directly at it.. you don't want to blind yourself.

TheRickoning
07-15-2017, 10:42 AM
Ted is the off color one, and blue and green can figured out by briefly connecting a battery with a resistor, or just use a AA. Use a length of wire or alligator clips. Don't look directly at it.. you don't want to blind yourself.

Thanks!